Kinshofer D06HPX Rotating Selector Grab (4 – 6t Excavators)

The new demolition and sorting grabs with the low maintenance HPXdrive for excavators up to 2t / 4,400lbs operating weight. THE universal tool for all kind of light demolition and sorting work.

  • HPXdrive – the revolutionary concept for hydraulically operated grabs! The rotation of the arms of the grab is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No hydraulic cylinder required!
  • 50% longer life cycle. The drive unit runs in a permanent oil bath – no lubrication necessary. Resistant against dirt and blows, due to the compact design.
  • New improved shell design! The perforated skin of the shells lets dust and fine gravel through – without larger pieces blocking the shell filter system.
  • Including the new, flat 10t-rotator with 360° endless rotation for precise positioning!
  • Constant closing force (D02: 14 kN / 3,147 lbf at 21 MPa / 3,024 psi; D04: 18 kN / 3,960 lbf at 25 MPa / 3,620 psi and D06: 18 kN / 3,960 lbf at 26 MPa / 3,770 psi) during the entire operation.
  • Different applications possible thanks to easy shell exchange system (from D04HPX)
  • Robust due to the use of cutting edge material 500 HB steel. Cutting edges usable both sides.

Share

Demolition and Sorting Grab D02HPX

Type

D04HPX-40

Width (min/in)

420 / 16.5

Opening A (min/in)

1,045 / 41.1

Height C Max (min/in)

812 / 31.9

Volume (liter/c.y.)

75 / 0.10

Weight (kg/lbs

280 / 616

Load Capacity* (kg/lbs)

1,500 / 3,300

Operating Weight (t/lbs)

2 - 4 / 4,400 - 8,800

KINSHOFER Rotator

Integrated in a single unit with HPXdrive, no more connecting hoses. Continuous rotation. Overload protection by pressure relief valves

Type

D04HPX - D06HPX: KM 10 F214/180

Upper dimension (hole/Ø-hole pattern) (mm/in)

6 x M16; Ø 180 / 7.0

Torque (Nm/ft.lb)

1,000 / 737

Bending moment max.(Nm/ft.lb)

12,000 / 8,850

Accessories

Type Description
KM 691 adapter plate for specific solutions
KM 690 adapter for rigid mounting
KSW rigid bolt-on adapter for system L-Lock adapters for quick change systems from other manufacturers or different sizes on request
KM 980-2 2t-8t c solenoid valve for additional circuit, up to 26MPa / 3,770psi, incl. parts and mounting
KM 685 05-D02-A02 4-Grip for D02/A02 (load capacity: 350 kg / 770 lbs)
KM 685 05-D04-A04 4-Grip for D04/A04 (load capacity: 600 kg / 1,320 lbs)
KM 685 05-D06/09-A06/09 4-Grip for D06/A06 (load capacity: 600 kg / 1,320 lbs) and D09/A09 (load capacity: 900 kg / 1,980 lbs)

Requirements of carrier machine

Operating pressure at pump capacity (open/close):

D02HPX: 21 MPa (210 bar) at max. 40 l/min / 3,024 psi at max. 10.6 GPM

D04HPX: 19 MPa (190 bar) at max. 75 l/min / 2,740 psi at max. 20 GPM

D06HPX: 26 MPa (260 bar) at max. 75 l/min / 3,745 psi at max. 20 GPM

D04HPX: 19 MPa (190 bar) at max. 75 l/min / 2,740 psi at max. 20 GPM

D06HPX: 26 MPa (260 bar) at max. 75 l/min / 3,745 psi at max. 20 GPM

Operating pressure at pump capacity (rotate):

D02HPX: 32 MPa (320 bar) at 10 - 40 l/min / 4,640 psi at 2.6 - 10.6 GPM

D04HPX: 32 MPa (320 bar) at 15 - 50 l/min / 4,640 psi at 4 - 13 GPM

D06HPX: 32 MPa (320 bar) at 20 - 50 l/min / 4,640 psi at 5.3 - 13 GPM

Technical drawings

technical drawing

If you can’t find the answer to your question, contact us below!

tac white logo

Search by Your Machine

SimexCBE40 crusher bucket
0

No products in the cart.